scroll and find out more...

Harvest preparation - Haulm topper | KS 3600

4-row, for row widths from 85 to 90 cm

In order to promote uniform ripening of the tubers, haulm reduction can be carried out two to three weeks before harvesting. In addition to preventing the transmission of viral infections from the haulm into the tuber, a good skin set on the tubers can be achieved to improve storability. Instead of or as a supplement to chemical siccation, GRIMME offers a sustainable solution of haulm topping. By using a haulm topper, the haulm of the potatoes is mechanically crushed and deposited between the ridges. Careful placement of the haulm between the ridges is important. Epecially if the stems of the potato plants are to be treated with other herbicides afterwards. A further advantage is the reduced risk of blockage at the intake of the harvester and the resulting increased throughput capacity in case of extreme masses of haulm.

Uniform power transmission

The 4-fold V-belt drive ensures an even transmission of the required torque.

Precise haulm discharge

Deflector plates ensure an exact haulm discharge between the ridges

Ideal force distribution to the flail shaft

The double sided drive of the strong gearbox ensures smooth running and relief of the material.

Height adjustable

The support wheels are equipped with a spindle for stepless height adjustment. Pendular support wheels can be selected as well, which allow steering movements.


  • Drive designed for high haulm amounts or high driving speed
  • Large diameter flail shaft ensure a good suction and flailing quality on and between the rows
  • For an optimum result diverse flail settings are available for various conditions.
  • Deflector plates ensure exact haulm discharge between the rows
  • Optimum depth control via infinitely adjustable support wheels and via tractor lifting

Images / video clips


You'll find all the information about the standard features of the machine here.


  • 3-point linkage for front or rear mounting
  • Heavy duty V-belt drive (4 times)
  • Heavy duty gearbox to give up to 1350 rpm rotor speed at 540, 750 or 1000 rpm PTO shaft drive.
  • Twin drive
  • Twin driven flail shaft with free wheel
  • Number of flails: 92 pieces
  • Haulm discharge between the rows or to wheelings
  • 2 support wheels fixed or swivel (option)

Technical data

KS 3600

Length 1800 mm
Length in transport position 5600 mm
Width 4100 mm
Width in transport position 1800 mm
Height 1200 mm
Height in transport position 1200 mm
Empty weight with basic configuration 1150 kg
Working width  
Row width 85 / 90 cm
Number of rows 4
Tractor attachment  
Lower linkage category 2 Cat.
Input speed p.t.o.-shaft 540 / 750 / 1000 rpm
Flails / scalper unit  
Number of flails 92
Number of support wheels 2
Support wheels 175 R14
Support wheels track width adjustable up to 3600 mm
Tractor requirements  
Engine power (min.) 55 kW

You may also be interested in these products: