GRIMME Ireland Equipment Ltd.

scroll and find out more...

Harvest preparation - Haulm topper | KS 75-4

4-row, for row widths from 75 to 80 cm

In order to promote uniform ripening of the tubers, haulm reduction can be carried out two to three weeks before harvesting. In addition to preventing the transmission of viral infections from the haulm into the tuber, a good skin set on the tubers can be achieved to improve storability. Instead of or as a supplement to chemical siccation, GRIMME offers a sustainable solution of haulm topping. By using a haulm topper, the haulm of the potatoes is mechanically crushed and deposited between the ridges. Careful placement of the haulm between the ridges is important. Epecially if the stems of the potato plants are to be treated with other herbicides afterwards. A further advantage is the reduced risk of blockage at the intake of the harvester and the resulting increased throughput capacity in case of extreme masses of haulm.

Uniform power transmission

The 4-fold V-belt drive ensures an even transmission of the required torque.

Cleaning made easy

Two large cleaning flaps allow an easy cleaning of the inside.

Single drive with free wheel

The freewheel in the drive train reduces the load on the PTO shaft and the drive shafts when disengaging at the headlands.

Height adjustable

The support wheels are equipped with a spindle for stepless height adjustment. n addition, pendular support wheels can be selected, which allow steering movements.

End tow kit

For safe transport width less than 3 m.

Video: KS 75-4 at work

Benefits

  • Drive designed for high haulm amounts or high driving speed
  • Large diameter flail shaft ensure a good suction and flailing quality on and between the rows
  • Easy conversion between front and rear mounting without extra parts
  • For an optimum result diverse flail settings are available for various conditions.
  • Deflector plates ensure exact haulm discharge between the rows
  • The desired residual length of haulm can be conveniently adjusted by height-adjustable support wheels and the three-point linkage of the tractor.

Images / video clips

Specifications

You'll find all the information about the standard features of the machine here.

Configuration

  • 3-point linkage for front or rear mounting
  • Wide angle p.t.o.-shaft
  • Heavy duty V-belt drive (4 times)
  • Heavy duty gearbox to give up to 1300 rpm rotor speed at 540, 750 or 1000 rpm PTO shaft drive.
  • Number of flails: 82 pieces
  • Haulm discharge between the rows or to wheelings
  • Single driven flail shaft with free wheel
  • 2 support wheels fixed or swivel (option)

Technical data

KS 75-4

Dimensions  
Length 2200 mm
Length in transport position 4650 mm
Width 3250 mm
Width in transport position 1900 mm
Height 1400 mm
Height in transport position 1500 mm
Weight  
Empty weight with basic configuration 950 kg
Working width  
Row width 75 / 80 cm
Number of rows 4
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 / 750 / 1000 rpm
Flails / scalper unit  
Number of flails 82
Support  
Number of support wheels 2
Support wheels 175 R14
Support wheels track width adjustable up to 3000 mm
Tractor requirements  
Engine power (min.) 45 kW

You may also be interested in these products: