scroll and find out more...
Carrot technology - Trailed harvester | T-200DF
Two rows, trailed, with overloading elevator
The harvester, type T-200DF, is a trailed, two-row top lifter with cart elevator. It is used for the efficient harvesting of carrots, parsnips and other vegetables. The machine is characterised by its simple, robust design and a long top-lifting assy. A share loosens the soil below the root. The rotating torpedoes raise the haulm/carrot tops so that it can be pulled out by the pick-up belt. Afterwards, a root-cleaner removes adhering soil. The tops of the crop are cut off at their base by a cutting unit and ejected behind the machine. The carrots are conveyed directly via cross conveyor onto the cart elevator. Thanks to this direct crop flow with few drop steps, this variant is particularly gentle on the crop so that the carrots remain storable.
Benefits
- High level of crop protection thanks to the digging system with a top lifter belt and a direct, straight crop flow in the machine. This reduces losses and increases the proportion of marketable goods.
- High capacity due to multi-row intake.
- Overload protection devices fitted as standard in the top-lifting assy prevent major damage to the intake, thus reducing repair times and costs and increasing the operational reliability and availability of the machine.
- Shear bolts for the torpedoes reduce the risk of the belt arm lowering/diving into the ground.
- Shear bolts in the front part of the intake prevent the top-lifting assy from bending in the event that the intake "dives" into the ground or hits a large object in the field.
- A spring prevents the two halves of the top-lifting assy from bending open when a stone is conveyed upwards.
- The first top lifter rollers arranged next to each other allow the clamping force to be adjusted in the foremost area. Compared to offset mounted top lifter rollers, these can achieve a higher clamping force if required in order to reduce losses or increase the harvesting speed.
- The standard quick-release system for the following offset mounted top lifter rollers enables an easy adjustment of the clamping force or simple belt replacement to minimise machine maintenance costs.
- The bearing of the top lifter rollers with rubber spring elements is maintenance-free and therefore reduces maintenance costs and ensures a constant clamping force.
- Cutting unit with special sealing for long service life.
- Precise synchronisation of the cutting unit by a gear transmission for an accurate removal of haulm/carrot tops and a long service life.
- Standard rubber covers on the bars of the main web reduce damage and increase the proportion of marketable goods.
Specifications
You'll find all the information about the standard features of the machine here.
Configuration
- Rotatable, not driven torpedoes
- Overload protection・(shear bolts)・for・the・torpedoes as standard equipment
- Share system with mechanical stone protection (shear bolt)
- Toplifting unit with a pick-up belt length of 475"
- Speed adjustment of top lifter belt manually via flow control valve
- One hydraulically driven root-cleaner and one pair of rigid root-cleaners fitted as standard
- Quick release system as standard for the top lifter rollers.
- Spring-loaded belt cleaners at the rear deflection fitted as standard
- Cutting unit driven by one hydraulic motor
- Cross conveyor with a width of 700 mm and rubber covered bars.
- Cart elevator with a width of 1000 mm and rubber covered bars.
- Hydraulic axle steering
- Air brake
- Wheels 600/65 R30
- "ASA-BUS" Touch-screen terminal incl. control box
Technical data
T-200DF
Working width | |
---|---|
Number of rows | 2 |
Unloading elevator | |
Width of overloading elevator | 1000 mm |