ASA-LIFT A/S

scroll and find out more...

Harvesting Technology - Windrower | WH 200

2-row mounted, from 68 HP on

Potatoes and other root crops are harvested worldwide using various methods and degrees of mechanisation. With its WH 200, GRIMME offers a mounted windrower, which was designed for various applications. Thanks to its easy handling and the minimum required tractor power of 68 hp, the WH 200 is the perfect machine to start mechanised harvest of potatoes and other root crops. Depending on the machine-model, the crop is deposited centrally or laterally behind the machine. The centered placement is common when the potatoes are collected by hand. Equipped with a crop cross conveyor the harvester WH 200 can be used in enhanced harvesting processes. In this case, the crop from two rows is deposited laterally between the next two neighbouring rows and then harvested together. In addition to protecting the crop and improving sieving performance, the "enhanced harvesting process" significantly increases the output of the following potato harvester.

Compact and robust machine

The WH 200 is designed in a robust way, it provides a gentle separation and a wide tuber placement on the ground. The mounted machine improves handling and manoeuvrability on the headland.

Windrowing

Superficial disposal of the harvested potatoes on the ground for further drying.

2+2=4 rows

The so-called fortified harvest process can significantly increase the output of the potato harvester.

Well proven digging units

The drive and digging units are taken from proven 2-row harvester technology

For heavy digging conditions

A mechanically adjustable rotary agitator ensures additional gentle sieving on the second main web. Thus, the sieving performance is increased, especially under heavy digging conditions.

Video: WH 200 S "enriched" / fortified harvest process.

Benefits

  • Compact and robust machine
    • Mounted machine, improves handling and manoeuvrability on the headland
  • WH 200 Eco – centre discharge
    • 2-phased harvest process
    • Light machine for tractors with little lifting power
    • Without diablo rollers, avoids ridge compaction
    • One long main web for maximum crop protection
    • Bend at the main web end minimizes the drop height
    • Triangular roller with adjustable intensity, mounted below the main web in order to improve sieving capacity.
  • WH 200 C – centre discharge
    • 2-phased harvest process
    • Two short main webs with extra drop for effective sieving
    • Bend at the end of the second main web minimizes the drop height for crop transfer
    • Triangular roller with adjustable intensity, mounted below the main web in order to improve sieving capacity.
    • Option: Rotary agitator for additional soil sieving
  • WH 200 S - side discharge
    • Fortified harvest process (in 2 steps) - increases the output of the potato harvester
    • Two short main webs with extra drop for effective sieving
    • Triangular roller with adjustable intensity, mounted below the main web in order to improve sieving capacity.
    • Option: Rotary agitator for additional soil sieving

Images / video clips

Specifications

You'll find all the information about the standard features of the machine here.

Configuration

  • WH 200 Eco – centre discharge
    • full width share blade for row width 75 or 90 cm
    • share frame without angle adjustment
    • 2 spring mounted, height adjustable disc coulters
    • Without diablo rollers
    • Without haulm feed-in rollers
    • One long main web with joiner connection
    • Pitch dependent drive for the main web
    • Height adjustable triangle rollers in the main web
    • 2 rear support wheels
    • Drive shaft with overload clutch
  • WH 200 C – centre discharge
    • Intake width 580 or 620 mm
    • Share blade frame with angle adjustment
    • Centered retaining rubber
    • 2- or 3-piece share blade
    • 4 spring mounted disc coulters
    • 2 haulm feed-in rollers
    • 2 main webs with joiner connection
    • Pitch dependent drive for the 1st and 2nd main web
    • Height adjustable triangle rollers in the 2nd main web
    • 2 rear support wheels
    • Drive shaft with overload clutch
  • WH 200 S - side discharge
    • Intake width 580 or 620 mm
    • Share blade frame with angle adjustment
    • Centered retaining rubber
    • 2- or 3-piece share blade
    • 4 spring mounted disc coulters
    • 2 haulm feed-in rollers
    • 2 main webs with joiner connection
    • Pitch dependent drive for the 1st and 2nd main web
    • Height adjustable triangle rollers in the 2nd main web
    • 2 rear support wheels
    • Drive shaft with overload clutch
    • crop cross conveyor

Technical data

5141-020 WH 200 Eco

Dimensions  
Length 3800 mm
Width 1900 mm
Height 1400 mm
Weight  
Empty weight with basic configuration 800 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width mm
1st main web sieving area 3,32 m²
2nd main web sieving area
Wheels  
Wheels 5.00-8
Tractor requirements  
Engine power (min.) 50 kW
Required control valves (single acting)
Non-pressurized return flow

5141-030 WH 200 C

Dimensions  
Length 3800 mm
Width 1900 mm
Height 1400 mm
Weight  
Empty weight with basic configuration 1300 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width 1700 mm
1st main web sieving area 1,34 m²
2nd main web sieving area 2,1 m²
Wheels  
Wheels 5.00-8
Tractor requirements  
Engine power (min.) 65 kW
Required control valves (single acting)
Non-pressurized return flow

5141-040 WH 200 S

Dimensions  
Length 4400 mm
Width 2540 mm
Height 1500 mm
Weight  
Empty weight with basic configuration 1500 kg
Tractor attachment  
Lower linkage category 2 Cat.
Drive  
Input speed p.t.o.-shaft 540 rpm
Main webs  
1st main web width 1700 mm
2nd main web width 1700 mm
1st main web sieving area 1,34 m²
2nd main web sieving area 1,91 m²
Wheels  
Wheels 155/80 R13
Tractor requirements  
Engine power (min.) 65 kW
Required control valves (single acting) 1
Non-pressurized return flow 1

You may also be interested in these products: